Need help?Do you have a question about the Nelson PRO 6000 and is the answer not in the manual?
General| Brand | Nelson |
|---|---|
| Model | PRO 6000 |
| Category | Irrigation System |
| Language | English |
Connect the gear drive unit to the underground water supply pipe.
Secure the cap in its raised position using the provided clamp.
Remove the sprinkler head's protective cap.
Choose and install the appropriate nozzle for desired spray pattern.
Configure the sprinkler for 360-degree operation.
Set the sprinkler to water a specific arc or sector.
Test the sprinkler's performance and adjust spray with water flow.
Reinstall the sprinkler head cap after setup or maintenance.
To Next Page
