Need help?Do you have a question about the Nelson RainTrain2 and is the answer not in the manual?
General| Brand | Nelson |
|---|---|
| Model | RainTrain2 |
| Category | Irrigation System |
| Language | English |
Owner is responsible for safe operation and following instructions.
Explains safety alert symbols and their meanings for injury prevention.
Keep children and others away from the machine and operating sprinklers.
Covers guards, service, power lines, and general operation safety practices.
Attaching wheels, sprinkler head, nozzle, and hose fitting.
Identifies key controls: Speed Control Knob, Drum Disengage, Sprinkler Arc Clips, On/Off Valve Rod.
Describes the operation of the On/Off Valve and Control Rod.
Checks before the irrigation season, including gearbox and cable inspection.
Checks before each irrigation run, including wheels, sprinkler, and control rod.
Steps for preparing the machine for storage during winter.
Setting the machine position, connecting the drag hose, and checking layout.
Disengaging and engaging the cable drum drive pin for operation.
Verifying settings, starting irrigation, adjusting speed, and automatic shut-off.
How to adjust part-circle stops and remove the part-circle pin.
Steps for removing wheels, covers, and cable pulley.
Instructions for removing gearbox and turbine covers.
Adjusting the latching spool and servicing the on/off valve.
Provides physical specifications of the machine.
Explains how to adjust the machine's speed using the controller.
Data on sprinkler performance based on nozzle and flow rate.
Guide for selecting feeder hose based on flow rate and friction loss.
To Next Page
