Neopost IS-5000 Installation Guide

System Sleep Mode
Your Mailing System is Energy Star® qualified and automatically goes into a low-power
'Sleep' mode after a period of inactivity.
A very low-power 'Sleep' mode, called 'Soft-off' is also available.
•
The Mailing System will automatically switch to 'Sleep' mode after 5 minutes of
non-activity. The Supervisor can change this 5-minute default setting.
•
The Mailing System can be set to 'Sleep' mode manually by a short press on the
Sleep/Wake button.
•
The Mailing System can be set to 'Soft-off' mode manually by a long press on the
Sleep/Wake button.
The light located on the display indicates:
- Amber (continuous): the Mailing System is in Sleep mode (low power mode).
- Amber (blinking): the Mailing System is in Soft-off mode (very low power mode).
- Green: the Mailing System is in Wake up mode and ready for use.
SLEEP / WAKE KEY
The Sleep/Wake key is located at the top right corner
of the control panel.
Wakes the Mailing System up or turns it to 'Sleep' or
'Soft-off' mode.
Sleep/wake
| Page 31 | mrt-25-2014 02:59 |
How to Switch Between 'Sleep' And 'Wake' Modes
1.
Press the Sleep/Wake key to switch between “Sleep” and “Wake” modes.
To avoid weighing errors, make sure the Weighing Platform is clear
when you Wake up the machine.

Neopost IS-5000 Specifications

General

Brand	Neopost
Model	IS-5000
Category	Digital Mailing system
Language	English