Neopost M3000 User Manual

48
Flap is wrinkled
and sometimes
not opened
Envelope not within
specifications
Check specifications
and change
envelopes if needed
“Technical specifications”
on page 50
Envelope specifications
Flap sticks Store envelopes
according to
specifications
Envelope specifications
Flap curled Envelopes stored or
manufactured
improperly
Envelope specifications
Separation set too
narrow
Check separation
settings, adjust if
needed
“Loading envelopes” on
page 13
Fingers are placed
on top of the
envelope
Fingers adjusted too
deep into the
envelope
Check fingers
position, adjust if
needed
“Insert position” on
page 18
Envelope stops too
early
Check envelope stop
position, adjust if
needed
“Insert position” on
page 18
Machine stops
while inserting
(stoppage at the
inserting point)
Fingers not correctly
adjusted
Check fingers
position, adjust if
needed
“Insert position” on
page 18
Inserted document
too long for used
envelope
Check fold settings “Document settings” on
page 24
Envelope throat
incorrect
Check envelope
specifications
Envelope specifications
“Technical specifications”
on page 50
Envelope glued inside Eliminate faulty
envelopes
-
Window not glued
properly
Eliminate faulty
envelopes
-
Symptom Possible cause Remedy See section

Neopost M3000 Specifications

General

Brand	Neopost
Model	M3000
Category	Document Inserting Systems
Language	English