Neopost M3000 User Manual

49
ENGLISH
Flap not
sufficiently
moistened
Water level low Check water level,
refill if needed
“Sealing envelopes” on
page 14
Brushes dry Check brushes,
replace if needed by
the extra soaked set
“Sealing envelopes” on
page 14
“Maintenance” on
page 43
Brushes dirty Check brushes, clean
if needed
“Maintenance” on
page 43
Moistening cloth dry Check the moistening
cloth, refill water tray
if needed
“Sealing envelopes” on
page 14
Moistening cloth dirty Check the moistening
cloth, clean if needed
“Maintenance” on
page 43
Moistening brushes
inactive
Activate the
moistening brushes
“Sealing envelopes” on
page 14
Envelope not
filled properly or
envelope flap not
closed properly
Inserted document
too big
Check fold settings,
adjust if needed
“Document settings” on
page 24
Document not
inserted deep enough
Check adjustment of
envelope stop
position and fingers
“Insert position” on
page 18
No document fed Feeder empty Refill feeder “Loading documents” on
page 12
Separation set too
wide
Adjust the separation “Document separation”
on page 12
Side guides set too
narrow
Adjust the side
guides
“Adjusting side guides”
on page 12
Skewed
documents fed
Side guides set too
wide
Adjust side guides “Adjusting side guides”
on page 12
Symptom Possible cause Remedy See section

Neopost M3000 Specifications

General

Brand	Neopost
Model	M3000
Category	Document Inserting Systems
Language	English