Stereo environment
Adjust the stereo width. 70% is ideal for headphones, 100% for loudspeakers.
Sustain
Adjust the sustain.
Closed Sound Sensitivity
Setting the closed sound sensitivity. 100% being the most sensitive, and closest to
sounding like its acoustic instrument version. If setting the value lower, it will need
stronger pressure on the tonefields to close a sound.
Tonefield polyphony
Adjusting the density of a tone when hitting the same tonefield repeatedly.
Tuner
The default setting is 440 Hz. If you modify it, the system will load the scale you are
using at the moment.
Forced closed sounds
Forcing the instrument to play closed sounds. It is recommended to pair it with a foot
pedal.
Mirror assigned notes
The lowest side note is on the right side by default. When it is switched on, it will be
on the left side.
To Next Page
Loading...