The foot pedal connectors work as an expression pedal mode by default.
When the trigger pedal is turned on, the pedal connectors work as a kick trigger.
THRESHOLD
The default Noise threshold for the tonefields is 50%. It is recommended to
increase this value if you use a handpan stand, or if you play strongly or hard on the
body. You can decrease this value if you play softly on the instrument.
The default Noise threshold for the body is 20%. It is recommended to increase
this value if you use a handpan stand, or if you play strongly or hard on the
instrument. You can decrease this value if you need extra sensitivity for the body. It
may cause crosstalk between the body and the tonefields when this value is below
20%.
Noise threshold for trigger PEDAL 1
The threshold is where the trigger pedal perceives and ignores the signals.
With the slider it is possible to set the noise threshold for kick trigger pedal 1.
Noise threshold for trigger PEDAL 2
The threshold is where the trigger pedal perceives and ignores the signals.
With the slider it is possible to set the noise threshold for kick trigger pedal 2.
To Next Page
Loading...