Data Logging Extraction Steps
22 E-Coder)R900i Installation and Maintenance Guide
6Click Save on the HHU screen.
7 The HHU displays Data has been saved indicating that the log data
is now stored to the HHU. (See Figure 16).
The data is then ready to be downloaded into the host software for
graphing the data.
Figure 16 Data Has Been Saved
Once all the data has been sent to the HHU, the E-Coder)R900i LCD screen
goes back to the normal meter reading.
Refer to the online help for the software for steps of how to perform this task.
To Next Page
Loading...