Data Disc
Drop-down menu
Length of file name
Defines the possible length of the file name. Level 1 and Level
2 are available. In level 1 the file name can be eight characters
long and the file name extension (e.g. *.doc) three characters.
In level 2 the file name can be 31 characters long.
Drop-down menu
Character set
Defines the font used.
5.3.3 UDF Settings
The UDF tab provides options for configuring the UDF file system. The UDF standard was
developed by Osta (Optical Storage Technology Association) in response to the require-
ments of DVDs. The standard works on all platforms.
The following setting options are available in the Options drop-down menu:
Entry
Automatic Settings
Sets options automatically for the UDF file system.
We recommend that you select this entry.
Entry
Manual Settings
Enables you to manually define the UDF partition type and the
file system version.
Entry
Enable Xbox compati-
bility mode
Creates a disc that is compatible with Xbox.
This entry is available if the No Multisession option button is
selected on the Multisession tab.
A disc that is compatible with Xbox cannot be created as a multisession disc.
5.4 Saving Data Track
With Nero Burning ROM you can save a data disc as an image file. The image file can later
be burned to a recordable disc. The result is a copy of the original data disc.
To save the data disc as an image file, proceed as follows:
1. Insert the data disc in a drive.
2. Click the Extras > Save data tracks menu.
The Select Track window is opened. The tracklist shows you the sessions and data
tracks that are found on the disc. Due to the technical reasons, only the first data track of
the first session can be saved.
Nero Burning ROM 26
To Next Page
Loading...