Nero 9 - Ultrabuffer Settings; Lightscribe Settings

Configuration Options
Nero Burning ROM 85
16.4 Ultrabuffer Settings
The following configuration options are available on the Ultrabuffer tab:
Selection list
Method
Defines the memory capacity that Nero Burning ROM
uses as a RAM buffer.
The ultrabuffer
is a second memory that enhances the
physical buffer in the recorder.
Input field
Data buffer size
Defines the memory capacity that can be manually en-
tered.
The input field is only enabled when Manual Configu-
ration is selected in the selection list.
16.5 LightScribe Settings
The following configuration options are available on the LightScribe tab:
Area
Print contrast
Adjusts the desired print quality.
Selection list
Default LightScribe drive
Selects the drive with the LightScribe recorder.
Selection list
Genre
Specifies the genre.
Selection list
Current template
Defines a template for labels.
Selection list
Default print resolution (DPI)
Adjusts the desired print resolution.
Check box
Printing LightScribe labels
Enables the option to automatically burn a LightScribe
label.
This tab is only available if a LightScribe recorder has
been installed.