Burn Compilation
The speed test and simulation are not required for recorders that have a func-
tion for protecting against buffer underruns.
Audio, Video and Super Video CDs should always be burned using the disc-at-
once method. This entry is selected by default for these disc formats.
12.3 Starting The Burn Process - Burning Discs With The Drive
Many CD players cannot read rewritable CDs (CD-RW). You should therefore
use normal CD-ROMs for burning Audio CDs.
To start the burn process, proceed as follows:
1. Click the Burn button in the main screen.
The Burn Compilation window is opened; the Burn tab is in front.
2. Check or select the options on the individual tabs.
3. Insert an appropriate blank disc and click the Burn button.
The burn process is started. On the screen a progress bar indicates the progress being
made by the burn process.
4. If you want to shut down the PC when done (as long as this is technically feasible), select
the Shut Down PC after Completion of Burn check box.
5. If you want to check the written data after burning, select the Verify written data check box.
When the burn process has finished, a message window is opened.
6. If you want to display the extended area with the event log, click the Details button.
7. If you want to start another burn process with the same compilation, click the Burn Again
button.
8. Click the OK button.
The burning process is complete. You can now remove the burned disc from the re-
corder.
12.4 Burning With Image Recorder – Creating an Image File
To create an image file, proceed as follows:
1. Click the New button.
2. Create a new compilation of your choice.
Nero Burning ROM 71
To Next Page
Loading...