Push on the top cover and open it.
12
2
Check if coee box is empty:
If empty, please complete cleaning
procedure on pages 15-16 for deep
cleaning of dosing unit and coee box.
If not go ahead with recommended
weekly cleaning procedure.
12
1
Turn over coee box.
12
4
Turn lower disk No. 2 in the direction
of the “OPEN” arrow until you hear a
“Click”.
Remove lower disk No. 2, clean it with
hot water and dry it completely.
12
5
12
6
Clean both openings of the dosing
unit housing with a dry cloth.
12 12
7 9
Before reassembling make sure
that all parts are completely dry.
Place lower disk No. 2 back on
dosing unit housing. Turn it in the
direction of the “CLOSE” arrow
until you hear a “Click”.
12
8
Click !
Click !
Lower disk
No. 2
Insert coee box back to machine.
The
logo faces forwards.
Click !
CAUTION! Do not put any of the parts into the dishwasher!