Nescafe Tama - Cleaning Drawer & Mixing Chamber

14 of 26 15 of 26
CLEANING DRAWER & MIXING CHAMBER 2/2
Push down lever until you hear a
“Click”.
14
11
In case mesh has been removed:
Check orientation of the mesh (the
mesh has a top and a bottom side).
14
12
Align arrows on slider cover and
main body. Press the slider cover in
until you hear a “Click”.
Make sure that step 11 has been
correctly followed. Push mixing
chamber into the main body. Ensure
it is fully inserted.
14
14
14
15
Pull up blue handle to lock mixing
chamber.
Slide drawer in until you feel the
“Click”.
14
16
14
17
Check the holes inside the mixing
chamber: If the holes are blocked with
coee, rinse again with hot water.
14
10
Push mesh into original position.
Ensure it is fully inserted.
Check
inside!
To p
Bottom
14
13
Click !
Click !
Click !
Click !
CLEANING DRIP TRAY, TANKS & DOSING UNIT 1/2
CAUTION! Do not put any of the parts into the dishwasher!
(Weekly cleaning recommended)