EasyManua.ls Logo

Nescafe Tama - First Time Use and Initial Rinsing; Initial Machine Setup and Rinse; Maintenance Rinse Procedure

Nescafe Tama
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7 of 266 of 26 7 of 26
FIRST TIME USE AND INITIAL RINSING
Rinsing starts.
Wait until it stops.
6
6
After rinsing is completed, all icons
will turn steady green. Machine is
now ready for use.
6
7
Switch machine on. Power button
starts blinking green while machine is
heating up for approx. 25 seconds.
Power button and Espresso icon light
steady green.
Touch Espresso icon.
6
4
6
5
~25 sec
ON
Plug the machine only into mains
voltage of 220-240 V / 50-60 Hz.
Remove the water tank.
Put drinking water in the tank.
Never put any liquid other than
drinking water in the tank!
6
1
6
2
1
2
Re-attach the water tank to the main
body. Place a container with a capaci-
ty of at least 250 ml under the coee
outlet.
6
3
6
i
Before using the machine for the
first time:
Initial rinse must be done.
Perform a rinse with water tank
filled to maximum level (ap-
prox. 1 L). Preferably use soft
water.
REFILLING WITH COFFEE
6
i
For light cleaning or if machine
is left unused for more than 2
days, please
Empty, rinse, and replenish the
water tank
Touch and hold the Lungo
icon THEN the power button
simultaneously for 5 seconds
Go to for initial rinse.

Related product manuals