Nescafe Tama - Dosing Unit Reassembly

16 of 26 17 of 26
Put coee box back on dosing unit.
16
15
With the dosing unit held steady
at the bottom, close by turning the
coee box clockwise until it stops.
16
16
Remove coee box cap.
16
10
Clean cap with a soft damp cloth.
Do not clean the coee box with
flowing water!
16
11
Turn over the dosing unit housing
and align the triangular portions on
the dosing unit housing No. 3 and
upper disk No. 1.
16
14
No. 1
No. 3
CLEANING DRIP TRAY, TANKS & DOSING UNIT 2/2
Rinse and dry parts carefully before
reassembling! Ideally let it dry for
one night. Do not use a hair dryer -
deformation may result!
16
i
Align marks ▼ No. 3 with No. 2 and
fit together. The label “No. 3” gets
visible.
Using the thumbs of both hands turn
the lower disk No. 2 in the direction
of the “CLOSE” arrow until you hear
a “Click”.
No.3
16
12
16
13
No.2
No.3
Click !
CAUTION! Do not put any of the parts into the dishwasher!
(At least monthly cleaning recommended)