Nescafe Tama - Rinsing After Descaling

19 of 2618 of 26 19 of 26
DESCALING 2/2
18
7
18
9
Wait 5 minutes to let the descaling
solution work. Touch Espresso icon
to start again descaling process
(icon starts flashing green).
Wait another 5 minutes to let descal-
ing solution work. Throw away water
from container. Carefully rinse water
tank.
5 min 5 min
18
8
Descaling solution is discharged:
First from high velocity hot water jet,
then from coee outlet.
18
10
18
15
min.
500
ml
Place a container with a capacity of at
least 500 ml under the coee outlet.
Put drinking water in the tank. Insert
water tank to machine.
Throw away water from container.
Carefully rinse water tank. Fill up
water tank with drinking water. Insert
water tank back to machine.
18
11
Touch Espresso icon to start rinsing
process (icon starts flashing green).
18
12
Water is first discharged from the
high velocity hot water jet and then
from the coee outlet. Throw away
water from container.
18
13
When Espresso icon stops flashing,
touch Espresso icon again to start
second rinsing cycle (icon starts
flashing green).
18
14
Water is first discharged from the
high velocity hot water jet and then
from the coee outlet.
i
To quit the descaling mode, turn o the machine.