Netafim AQUA PRO User Manual

3
Programming the AQUA PRO:
Press and hold
<MODE>
2 Seconds
Once - set clock and dait
Twice - P1. 3 times - P2. 4 times -P3
Increase Decrease blinking digit.
<SET>
- Sets the entry and proceed.
To select an active program:
Press the
<MODE>
button
briefly: Once for P1.
Twice for P2. 3 times for P3
Four times for OFF.
Manual Operation:
To start: press &
<SET>
To stop: press &
<SET>
P1. -
Once daily at same time.
P2. -
Once daily on selected days.
P3. -
Up to 3 irrigations per day:
e.g. 1, 3, 5, 7,
Active Days.
Low
battery
Irrigation
duration.
start time.
Programming the AQUA PRO:
Press and hold
<MODE>
2 Seconds
Once - set clock and dait
Twice - P1. 3 times - P2. 4 times -P3
Increase Decrease blinking digit.
<SET>
- Sets the entry and proceed.
To select an active program:
Press the
<MODE>
button
briefly: Once for P1.
Twice for P2. 3 times for P3
Four times for OFF.
Manual Operation:
To start: press &
<SET>
To stop: press &
<SET>
P1. -
Once daily at same time.
P2. -
Once daily on selected days.
P3. -
Up to 3 irrigations per day:
e.g. 1, 3, 5, 7,
Active Days.
Low
battery
Irrigation
duration.
start time.
Stick your
language sticker
on the inside
cover.
Table of contents:
Installation
Controller Keyboard
Controller Icons & Display
Electric valve control button
Battery Insertion or replacement
Installation into the watering system
Programming steps
Set P1
Set p2
Set P3
Programming guide table
Controller display in operating mode
Technical information
Warranty
4
5
6
7
8
9
10
11
12
14
15
E

Netafim AQUA PRO Specifications

General

Brand	Netafim
Model	AQUA PRO
Category	Controller
Language	English