8
Programming steps
Note: Make sure that the override button (marked
with a red arrow) is in the central position AUTO).
Set Clock current time and day
Press <MODE> for 2 seconds.
1. Use or keys to adjust (MINS.)
2. Press <SET> to continue.
3. Use or keys to adjust (HRS.)
4. Press <SET> to continue.
5. Use or keys to select day of the week.
6. Press <SET>.
Clock setting is completed.
Important!
If no key is pressed for more than 30 seconds during
programming,the controller resumes operating mode.
E
To Next Page
Loading...
