NETAJET
™
4G INSTALLATION MANUAL
41
COMMISSIONING
After completing the calibration process, the NetaJet™ 4G is ready for commissioning.
Familiarize the client with the NetaJet™ 4G, the user manual (provided with the NetaJet™ 4G and
downloadable at https://www.netafim.com/en/digital-farming/netbeat/Fertigation/netajet/) and the
accompanying documents and emphasize the following points:
• The importance of following all the safety instructions.
• The warranty and its restrictions.
• Dosing calibration - review this chapter with the client and emphasize the importance of thorough
knowledge of the processes it describes for the current operation of the NetaJet™ 4G.
• Proper dissolving of fertilizers for optimal utilization of the dosing channel's capacity.
• The importance of regular maintenance and its impact on the warranty.
• TroUbleshooting - review this chapter with the client.
• The importance of periodic comparison of the hydraulic data with the references in the
NetaJet™ 4G Hydraulic Conditions Checklist (User Manual, page 45).
• Make sure the NetaJet™ 4G Hydraulic Conditions Checklist has been properly filled.
• Fill out the NetaJet™ 4G Commissioning Report.
• Keep one copy of both documents, give a copy to the client as reference for calibration of the NetaJet™ 4G
in the future and send a copy to cmt.support@netafim.com
To Next Page
Loading...
