Netafim Orbia GrowSphere MAX User Manual

Rev 01
|
GrowSphere
™
MAX User Manual
79
|
Controller Configuration
GrowSphere
Operating System
Allocating Remote I/O Settings
The system displays all the devices that were successfully allocated:
z
Name: The system set a default name. It is
suggested to type here a descriptive name of
the device.
z
Flow: Device's nominal flow rate.
z
Area (ha): Area (in hectares) of the irrigation
block that the valve is irrigating.
5. Define the following settings: 3. Tap the Remote I/O tab
4. Select the tab to define
the settings
1. Tap the Configuration
button
The devices can be
manually revised if needed.
2. Select Settings and type
your credentials
SAFETY
QUICK START
INTRODUCTION
INSTALL ATION
CONTROLLER
OPERATION
CONTROLLER
CONFIGURATION

Netafim Orbia GrowSphere MAX Specifications

General

Brand	Netafim
Model	Orbia GrowSphere MAX
Category	Controller
Language	English