l When the unit is on, press the power button
to put it in sleep mode.
l To shut down, hold the power button for
one second until the “Power off” dialog box
appears on the touchscreen, then tap
Power off .
l To perform a hard power off (without
shutting down the software), press and hold
the power button for five seconds.
The first time you turn it on, the LinkRunner G2
testing application opens and begins testing your
network immediately. Connect the top RJ-45 LAN
port or 100/1000 BASE-X Fiber port to an active
network to begin receiving test results.
18
Physical Features
To Next Page
Loading...
Need help?
General
