netAlly LINKRUNNER G2 User Manual

Cable Test
The Cable test can help you determine cable
length and status, wire map patch and structured
cabling, and locate cables. The Cable test tab can
perform tests using the configurations described
in this section.
With an unterminated cable test, you can determ-
ine length, shorts, and splits and locate opens.
With a terminated cable test using the internal
Wire Mapping Port or a WireView accessory, you
can identify cable length, shorts and opens, split
pairs, crossover cables, and normal or negative
pair polarity.
NOTE: LR G2 cannot perform a cable test on a
cable that is connected to a switch.
To restart testing at any time, tap the refresh icon
at the top right of the LR G2 app screen.
Refer to Buttons and Ports as needed.
66
LinkRunner G2 Tests and Results

netAlly LINKRUNNER G2 Specifications

General

Brand	netAlly
Model	LINKRUNNER G2
Category	Test Equipment
Language	English