Need help?Do you have a question about the netAlly LinkRunner AT 1000 and is the answer not in the manual?
General| Device Type | Network Tester |
|---|---|
| Model | LinkRunner AT 1000 |
| Manufacturer | netAlly |
| Ethernet Ports | 1 |
| Auto-MDIX | Yes |
| PoE Detection | Yes |
| PoE/Load Testing | Yes |
| Link Speed Detection | 10/100/1000 Mbps |
| Cable Test | Yes |
| Cable Length Measurement | Yes |
| Connectivity Testing | Yes |
| Network Discovery | Yes |
| Reflector Support | Yes |
| Battery Type | Lithium-ion |
| Battery Life | Up to 10 hours |
| Cable Testing | Wiremap, shorts, split pairs, opens |
| Display | Color LCD |
| Display Size | 2.8 inches |
| Battery | 2600 mAh |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
Online system for collecting, tracking, and organizing test results.
Windows PC application for updating software, creating profiles, and generating reports.
Guide to navigating the user manual with bookmarks and hyperlinks.
Provides additional documentation, release notes, and software updates.
Access valuable information, updates, and services by registering your product.
Information on how to contact NetAlly for support via online or phone.
Details descriptions of safety symbols used in the tester and manual.
Important safety guidelines for using the tester, including electrical and handling precautions.
Lists the items included in the LinkRunner AT package and where to find more information.
Identifies the main physical components and ports of the LinkRunner AT device.
Detailed descriptions of numbered physical features including keys, ports, and display.
Information on charging the tester's battery and its expected operational life.
Guidelines to prevent fire, electrical shock, injury, or damage to the tester.
Information on where to find a complete list of options and accessories for the tester.
Explanation of the icons and status indicators displayed on the Home screen.
Addresses common queries regarding network connectivity, DHCP, and IP addresses.
How to create an account, claim devices, and upload/manage test results.
Configuring IP addresses, including DHCP and static IP settings.
Setting up VLAN ID, priority, MAC address, and proxy settings.
Configuring targets and parameters for AutoTest connectivity tests.
Enabling and setting Power over Ethernet (PoE) detection parameters.
Setting up 802.1x authentication and network speed/duplex.
Configuring reporting modes, units, and device date/time.
Configuring the LR-AT 2000 as a reflector for performance tests.
Details on MAC+NetAlly and MAC+IP swap settings for the reflector.
Displays product details like serial number, MAC, SW version, and build.
Loading, saving, renaming, and deleting profiles and reports.
Steps to save, overwrite, and rename measurement data reports.
Procedure for deleting report or profile files from the tester.
Resets all configuration changes to the tester's original factory settings.
Instructions for downloading and installing firmware updates for the tester.
Moving profiles between the tester and the LinkRunner Manager PC.
Procedure for changing the display language of the tester.
Performing connectivity tests to up to ten targets using IP addresses or DNS names.
Discovering and displaying information about the nearest network switch.
Measuring cable length, performing wire mapping, and tracing cables.
Displaying PoE request/acknowledgment and measured voltage without a load.
Displaying PoE details with TruePower enabled, including measured load.
Showing PoE test results with TruePower applied and load measurements.
Details operating, storage, and shock/vibration specifications.
Provides details on media access, cable testing, dimensions, weight, and display.
Lists system requirements for the LinkRunner Manager software.
To Next Page
