netAlly LinkRunner AT 1000 User Manual

Additional LinkRunner Tools
24
2 Open LinkRunner Manager.
3 Turn on the tester.
4 Use the USB cable supplied with the tester to connect the
tester to the PC.
5 To see the profiles that are on the tester, select Tools > Profile
Manager from the LinkRunner Manager tool bar. Profile names
display under the LinkRunner Profile Files pane.
6 Highlight a profile in this pane, and select Transfer from
LinkRunner.
7 When you are done editing the profile, highlight it and select
Transfer to LinkRunner.
Set Language
To change the language displayed in all screens 1
Select Tools > Set Language.
2 Highlight a language and press Save.

netAlly LinkRunner AT 1000 Specifications

General

Brand	netAlly
Model	LinkRunner AT 1000
Category	Test Equipment
Language	English