netAlly LINKRUNNER G2 - Restoring Factory Defaults

Restoring Factory Defaults
WCAUTION: This operation will delete all test
results, installed applications, and saved files, and
reset device settings to the factory default state.
Make sure to back up any files you desire to keep.
1.
To access the Android device settings, touch
the Settings icon at the bottom of the
Home Screen.
2. On the Settings screen, scroll down to the
Personal section, and touch Reset.
3. On the Reset screen, touch Factory data
reset.
4. At the bottom of the Factory data reset
screen, touch RESET LINKRUNNER G2.
5. The device asks you to confirm once more
that you want to restore all defaults. Touch
ERASE EVERYTHING to do so.
The device restarts with factory default settings.
92
Software Management