Power and Charging
The LinkRunner G2 contains a rechargeable
Lithium Ion battery. You can charge your LR G2
using either AC or Power over Ethernet (PoE). The
LinkRunner G2 does not charge via the USB port.
See Buttons and Ports.
Charging
To charge with AC power, plug the included AC
adapter into an AC outlet, and connect it to the
charging port on the device.
To charge with PoE, connect the RJ-45 port on the
device to a network switch with PoE available or
with a PoE injector.
NOTE: To charge via PoE, the LR G2 must be
powered on or in sleep mode, and PoE must be
enabled in the test settings.
Charge the battery for 4-6 hours before first use.
Powering On
l Press the power button on the front of the
unit to power on the LinkRunner G2.
17
Physical Features
To Next Page
Loading...
Need help?
General
