NetApp AFF A70 - Page 18

(1) Normal Boot.
(2) Boot without /etc/rc.
(3) Change password.
(4) Clean configuration and initialize all disks.
(5) Maintenance mode boot.
(6) Update flash from backup config.
(7) Install new software first.
(8) Reboot node.
(9) Configure Advanced Drive Partitioning.
(10) Set Onboard Key Manager recovery secrets.
(11) Configure node for external key management.
Selection (1-11)? 11
2. When prompted confirm you have gathered the required information:
a.
Do you have a copy of the /cfcard/kmip/certs/client.crt file? {y/n} y
b.
Do you have a copy of the /cfcard/kmip/certs/client.key file? {y/n} y
c.
Do you have a copy of the /cfcard/kmip/certs/CA.pem file? {y/n} y
d.
Do you have a copy of the /cfcard/kmip/servers.cfg file? {y/n} y
You may also these prompts instead:
e.
Do you have a copy of the /cfcard/kmip/servers.cfg file? {y/n} n
i.
Do you know the KMIP server address? {y/n} y
ii.
Do you know the KMIP Port? {y/n} y
3. Supply the information for each of these prompts:
a.
Enter the client certificate (client.crt) file contents:
b.
Enter the client key (client.key) file contents:
c.
Enter the KMIP server CA(s) (CA.pem) file contents:
d.
Enter the server configuration (servers.cfg) file contents:
16