b.
Enter the command to display the key management information:
security key-manager onboard
show-backup
c. Copy the contents of the backup information to a separate file or your log file. You’ll need it in disaster
scenarios where you might need to manually recover OKM.
d.
Return to admin mode:
set -priv admin
e. You can safely shutdown the node.
3.
If the
Key Manager type displays external and the Restored column displays anything other than
yes:
a.
Enter the onboard security key-manager sync command:
security key-manager external
sync
If the command fails, contact NetApp Support.
mysupport.netapp.com
b.
Verify that the
Restored column equals yes for all authentication keys: security key-manager
key query
c. You can safely shutdown the node.
4.
If the
Key Manager type displays onboard and the Restored column displays anything other than yes:
a.
Enter the onboard security key-manager sync command:
security key-manager onboard sync
Enter the customer’s onboard key management passphrase at the prompt. If the passphrase cannot be
provided, contact NetApp Support.
mysupport.netapp.com
b.
Verify the
Restored column shows yes for all authentication keys: security key-manager key
query
c.
Verify that the
Key Manager type shows onboard, manually backup the OKM information.
d.
Go to advanced privilege mode and enter
y when prompted to continue: set -priv advanced
e.
Enter the command to display the key management backup information:
security key-manager
onboard show-backup
f. Copy the contents of the backup information to a separate file or your log file. You’ll need it in disaster
scenarios where you might need to manually recover OKM.
g.
Return to admin mode:
set -priv admin
h. You can safely shutdown the node.
Option 1: Most systems
After completing the NVE or NSE tasks, you need to complete the shutdown of the
impaired node.
Steps
1. If the impaired node isn’t at the LOADER prompt:
7
To Next Page
Loading...
Need help?
General
