NetComm 802.11

YML800NX Power800NX PowerX PowerPower
n
User Guide
www.netcomm.com.au 13
802.11n Wireless Router
Configuring your Router
PC Network Adapter setup (Windows XP)
Set your network adapter to obtain an IP Address automaticly (See section on PC Network Adapter setup in this
manual for details)
• Click on [Start Menu] > select [Control panel] > select [Network Connections]
• Select [Local Area Connection]) icon > select [properties]
• Select [Internet Protocol (TCP/IP)] > Click [Properties]
To WAN port
Telephone
Wall Socket
ADSL Broadband Modem
Splitter with
Microfilter
Home
Telephone
Internet
To 12V DC
POWER port
Computer with
Ethernet Card
To ETHERNET port
(1, 2, 3, 4 on
4 port models)
To LINE/DSL port
Wireless
Router