Power
n
Series User Guide YML800NX
66 www.netcomm.com.au
LAN
The LAN Tabs reveals LAN settings which can be altered at will. If you are an entry level user, try accessing a
website from your browser. If you can access website without a glitch, just do not change any of these settings.
Click <Apply> at the bottom of this screen to save the changed configurations.
IP address: It is the router’s LAN IP address (Your LAN clients default gateway IP address). It can be changed
based on your own choice.
IP Subnet Mask: Specify a Subnet Mask for your LAN segment.
802.1d Spanning Tree: This is disabled by default. If 802.1d Spanning Tree function is enabled, this router will use
the spanning tree protocol to prevent network loops.
Schedule
Add schedule, edit schedule options allow configuration of power savings services. Fill in the schedule and select
type of service. Click <Apply> to implement the settings.
The schedule table lists the pre-schedule service-runs. You can select any of them using the check box.
To Next Page
Loading...
