NetComm 802.11

YML800NX Power800NX PowerX PowerPower
n
User Guide
www.netcomm.com.au 57
802.11n Wireless Router
Routing
You can set enable Static Routing to let the router forward packets by your routing policy.
Destination LAN IP: Specify the destination LAN IP address of static routing rule.
Subnet Mask: Specify the Subnet Mask of static routing rule.
Default Gateway: Specify the default gateway of static routing rule.
Hops: Specify the Max Hops number of static routing rule.
Interface: Specify the Interface of static routing rule.