Power
n
Series User Guide YML800NX
18 www.netcomm.com.au
To set up your wireless security, hover your mouse over the security bar. The window will tell you what level you
have selected. You will then need to set your “SSID”, this is the name of your wireless network. You can use any
name. You will then need to select a “Key”.
The Key is your security number (you will need to remember this as you will need to enter this when wirelessly
connecting to your network. Click <Next> to proceed.
To apply the entire configuration, click <Reboot>.
To Next Page
Loading...
Need help?
General
