YML800NX Power800NX PowerX PowerPower
n
User Guide
www.netcomm.com.au 51
802.11n Wireless Router
Add Port Triggering
Fill in the “Trigger Port”, “Trigger Type”, “Public Port”, “Public Type”, “Public Port” and “Description” of the setting
to be added and then Click <Add>. The Port Triggering setting will be added into the “Current Trigger-Port Table”
below. If you happen to make a mistake, just click <Clear> and the fields will be cleared.
Remove Port Triggering
If you want to remove Special Application settings from the “Current Trigger-Port Table”, select the Port Triggering
settings you want to remove in the table and then click <Delete Selected>. If you want remove all Port Triggering
settings from the table, just click the <Delete All> button. Click <Reset> will clear your current selections.
To Next Page
Loading...
Need help?
General
