NetComm NB604N - Page 25

www.netcommwireless.com
25
NetComm NB604N – ADSL2+ Wireless N300 Modem
Router
YML604X
IPv6 Autoconfig
The NB604N offers a stateless IPv6 Autoconfig function for IPv6 enabled devices connected via the LAN.
The following auto configuration options are available:
PARAMETER
DEFINITION
Interface Address
Set the IPv6 Address of the NB604N
Enable DHCPv6 Server
Select to enable the stateless DHCPv6 Server
Enable RADVD
Select to enable the Router Advertisement Daemon
Site Prefix Configuration
Select to use either the Site Prefix as supplied by the WAN connection or manually enter the Site Prefix and Site Prefix
Length
Enable MLD Snooping
Select to enable MLD Snooping and the MLD Snooping mode to use
Click Save/Apply to save the new IPv6 Autoconfig settings.