NetComm NF18ACV Setup Guide

NF18ACV NC2 FAQs – Parental Control Setup Guide
4 of 10
FQ01103 v. 1.1 March 2019
© NetComm Wireless 2019
6 Click on
Apply/Save when complete.
Prerequisite 3 – Define block lists
This step is not required if you plan to only use the Internet Blackout method of access restriction.
Block Lists must be defined for use in
Scheduled Blocking and Permanent (Category) Blocking methods.
1 From the Parental Control start page go to the Block lists section and click the plus button to display the
current services or URL addresses in the
Block List.
2 To add more destinations, or to create a new list, click the
Modify button.
3 Enter the relevant
Keyword or URL address in the field and click the Add button.
4 Click on the
Red cross icon to remove a destination.
Note
– The number of block lists is limited to the eight displayed in the
Block lists
section.

NetComm NF18ACV Specifications

General

DSL WAN	No
Ethernet WAN	Yes
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	1600 Mbit/s
Networking standards	IEEE 802.11ac, IEEE 802.11d, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
USB port	-
RJ-11 ports quantity	2
Ethernet LAN (RJ-45) ports	4
Security algorithms	WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Product type	Tabletop router
Product color	White
Output current	2 A
Output voltage	12 V
Power source type	AC
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	28 mm
Width	216 mm
Height	174 mm
Weight	558 g