Security Gateway Manual Netgate-2100
Description Text describing the rule, e.g. Allow clients to resolve DNS through
the firewall
• Click Save
Add rule to pass ICMP to firewall
• Click to add a new rule at the bottom of the list.
• Configure the rule as follows:
Action Pass
Interface OPTx (or the custom name)
Protocol ICMP
ICMP Subtype Any is OK in this case, ICMP is useful but some people prefer to limit to Echo
Request only to allow ping and nothing else.
Source OPTx Net (or the custom name)
Destination This Firewall (self)
Description Allow client ICMP to the firewall
• Click Save
Add rule to reject any other traffic to firewall
• Click to add a new rule at the bottom of the list.
• Configure the rule as follows:
Action Reject
Interface OPTx (or the custom name)
Protocol Any
Source Any
Destination This Firewall (self)
Description Reject all other traffic to the firewall
• Click Save
Add rule to reject traffic from this network to private networks
• Click to add a new rule at the bottom of the list.
• Configure the rule as follows:
Action Reject
Interface OPTx (or the custom name)
Protocol Any
Source Any
Destination Single Host or Alias, PrivateNets (the alias created earlier)
Description Reject all other traffic to private networks
© Copyright 2023 Rubicon Communications LLC 65
To Next Page
Loading...
