NETGEAR A6150

Factory default settings
The following table lists the default settings of your adapter.
Table 2. Factory default settings
Default SettingFeature
Enabled (non-configurable)WiFi
communication
United States, but varies by country or region of purchaseCountry or region
802.11ac, 802.11a, 802.11n, 802.11g, or 802.11bOperating mode
Enabled (non-configurable)MU-MIMO
Enabled (non-configurable)Beamforming
Up to 866 Mbps with a WiFi router or access point that supports 802.11ac
Up to 300 Mbps with a WiFi router or access point that supports 802.11n in the 2.4 GHz band
Up to 54 Mbps with a WiFi router or access point that supports 802.11g
Up to 54 Mbps with a WiFi router or access point that supports 802.11a
Up to 11 Mbps with a WiFi router or access point that supports 802.11b
Data rate
Technical specifications
The following table lists the technical specifications of your adapter.
Table 3. Technical specifications
DescriptionFeature
Internal dual-band monopole antennasAntenna
802.11ac
802.11n
802.11g
802.11b
802.11a
IEEE standards
AutosensingRadio data rate
2.4 GHz to 2.5 GHz CCK and OFDM modulation
5 GHz OFDM, 802.11n MCS0-15, and 802.11ac MCS0-9 coding scheme
Frequency
User Manual20Factory Default Settings and
Technical Specifications
AC1200 WiFi USB Adapter Model A6150 User Manual