NETGEAR AC1000 User Manual

Factory Settings
You can reset the router to the factory default settings that are shown in the following
table.
For more information about resetting the router to its factory settings, see Return
the
Router to Its Factory Default Settings on page 98.
The following table shows the factory default settings for the router.
Table 4. Router factory default settings
Default SettingFeature
Router login
www.routerlogin.net (or www.routerlogin.com or 192.168.1.1)User login URL
adminUser name (case-sensitive)
passwordDefault login password
(case-sensitive)
Internet connection
Use default hardware address.WAN MAC address
Determined by the protocol that is used for the Internet connection (see
Manage the MTU Size on page 40)
WAN MTU size
AutoSensingPort speed
Local network (LAN)
192.168.1.1LAN IP address
255.255.255.0Subnet mask
EnabledDHCP server
192.168.1.2 to 192.168.1.254DHCP range
192.168.1.2DHCP starting IP address
192.168.1.254DHCP ending IP address
DisabledDMZ
North America: Pacific Standard Time
Europe: GMT
Other continents: Varies by region
Time zone
DisabledTime adjusted for daylight
saving time
User Manual136Supplemental Information
AC1000 WiFi Router Model R6080

NETGEAR AC1000 Specifications

General

WiFi Performance	AC1000 (300 + 700 Mbps)
WiFi Range	Medium to large homes
Beamforming	No
Antennas	2 external antennas
WiFi Technology	802.11ac
USB Ports	1 (USB 2.0)
Security	WPA/WPA2
Number of Ethernet Ports	4 (10/100 Mbps)
Weight	265 g