Table 4. Router factory default settings (Continued)
Default SettingFeature
Firewall and WAN security
Disabled (except traffic on port 80, the HTTP port)Inbound (communications
coming in from the
Internet)
Enabled (all)Outbound
(communications going
out to the Internet)
DisabledSource MAC filtering
DisabledIGMP proxying
EnabledVPN pass-through
EnabledSIP ALG
SecuredNAT filtering
Main WiFi network
EnabledWiFi communication
See the router label.SSID name
WPA2-PSK (AES)Security
See the router label.WiFi passphrase
North America: United States
Europe: Europe
Other continents: Varies by region
Country/region
The available channels depend on the region.RF channel
Auto
Note that throughput can vary: Network conditions and environmental
factors, including volume of network traffic, building materials and
construction, and network overhead, affect the data throughput rate.
Transmission speed
Up to 300 Mbps at 2.4 GHz
Up to 650 Mbps at 5 GHz
Operating mode
100%, nonconfigurableTransmit power
Guest WiFi network
DisabledWiFi communication
2.4 GHz band: NETGEAR_Guest
5 GHz band: NETGEAR-5G_Guest
SSID name
None (open network)Security
User Manual137Supplemental Information
AC1000 WiFi Router Model R6080
To Next Page
Loading...
Need help?
General
