NETGEAR AC1000

Table 4. Router factory default settings (Continued)
Default SettingFeature
DisabledAllow guests to access
main network
General WiFi settings
100%, nonconfigurableRadio transmission power
Enabled20/40 MHz coexistence
2346Fragmentation length
2347CTS/RTS threshold
Long PreamblePreamble mode
WPS
EnabledWPS capability
Enabled. See the router web interface (select ADVANCED > Advanced
Setup > Advanced Wireless Settings).
Router’s PIN
EnabledKeep existing wireless
settings
User Manual138Supplemental Information
AC1000 WiFi Router Model R6080