NETGEAR AC1200 User Manual

9
 To retrieve a forgotten password:
To use this feature, yo
u must have enabled password recovery.
1. L
aunch a web browser from a computer or wireless device that
is connected to the router.
2. Ty
pe www.routerlogin.net or www.routerlogin.com in the
address field of the browser.
3. When
the login screen displays, click Cancel.
You are prompted to enter your sa
ved answers so that you can
log in to the router.
ReadySHARE Access
You can connect a USB storage device to the USB port on the router
and share it on the network.
 T
o access your USB device on a Windows system, do any of
the following:
• Sel
ect Start > Run and enter \\readyshare in the dialog box.
Click OK.
• O
pen a browser and enter \\readyshare in the address bar.
• Open
My Network Places and enter \\readyshare in the address
bar.

NETGEAR AC1200 Specifications

General

2.4 GHz	Yes
Modulation	-
Frequency band	2.4 - 5 GHz
Number of users	- user(s)
Channels quantity	- channels
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate	900 Mbit/s
Internal	No
Minimum system requirements	Intel Pentium class PC Available USB 1.1, USB 2.0, or USB 3.0 port Microsoft Windows 7, XP, Vista: (32/64-bit) Supports Windows 8
Cables included	USB
Interface	WLAN
USB version	2.0/3.2 Gen 1 (3.1 Gen 1)
USB connector type	USB Type-A
Connectivity technology	Wireless
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, 802.11b, 802.11g
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
WLAN data transfer rates supported	300, 867 Mbit/s
Quantity	1
Windows operating systems supported	Windows 10, Windows 7, Windows 8, Windows 8.1, Windows Vista, Windows XP
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	93 mm
Width	31.4 mm
Height	14.45 mm
Weight	28 g