NETGEAR AC1200 User Manual

2
2. Connect your modem.
a. Plug
in, then turn on your modem. (Replace the batteries if
you removed them previously.)
b. With
the yellow Ethernet cable that came with the router,
connect your modem to the Internet port of your router.
Router
Modem

NETGEAR AC1200 Specifications

General

2.4 GHz	Yes
Modulation	-
Frequency band	2.4 - 5 GHz
Number of users	- user(s)
Channels quantity	- channels
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate	900 Mbit/s
Internal	No
Minimum system requirements	Intel Pentium class PC Available USB 1.1, USB 2.0, or USB 3.0 port Microsoft Windows 7, XP, Vista: (32/64-bit) Supports Windows 8
Cables included	USB
Interface	WLAN
USB version	2.0/3.2 Gen 1 (3.1 Gen 1)
USB connector type	USB Type-A
Connectivity technology	Wireless
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, 802.11b, 802.11g
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
WLAN data transfer rates supported	300, 867 Mbit/s
Quantity	1
Windows operating systems supported	Windows 10, Windows 7, Windows 8, Windows 8.1, Windows Vista, Windows XP
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	93 mm
Width	31.4 mm
Height	14.45 mm
Weight	28 g