NETGEAR AC1200 User Manual

4
4. Connect a computer.
You can use an Ethernet cable
or connect wirelessly.
• F
or a wired connection, use an Ethernet cable (not included)
to connect your computer to a black Ethernet LAN port on
your router.
• T
o connect wirelessly, use the preset wireless security
settings on the label on the bottom of the router.
5. Lau
nch a browser.
The first time that you connect to
the router, the genie screen
displays. Follow the genie steps to connect to the Internet.
If the genie screen does not disp
lay, close and reopen the
browser. Type www.routerlogin.net in the address bar. Type the
user name admin and the default password (password).

NETGEAR AC1200 Specifications

General

2.4 GHz	Yes
Modulation	-
Frequency band	2.4 - 5 GHz
Number of users	- user(s)
Channels quantity	- channels
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate	900 Mbit/s
Internal	No
Minimum system requirements	Intel Pentium class PC Available USB 1.1, USB 2.0, or USB 3.0 port Microsoft Windows 7, XP, Vista: (32/64-bit) Supports Windows 8
Cables included	USB
Interface	WLAN
USB version	2.0/3.2 Gen 1 (3.1 Gen 1)
USB connector type	USB Type-A
Connectivity technology	Wireless
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, 802.11b, 802.11g
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
WLAN data transfer rates supported	300, 867 Mbit/s
Quantity	1
Windows operating systems supported	Windows 10, Windows 7, Windows 8, Windows 8.1, Windows Vista, Windows XP
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	93 mm
Width	31.4 mm
Height	14.45 mm
Weight	28 g