NETGEAR AirCard 785

Advanced Settings
56
AirCard 785 Mobile Hotspot
Set LAN Options
 To set the hotspot’s LAN options:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://netgear
.aircard or http://192.168.1.1.
A login screen displays.
3. Enter the password in the Sign In field.
The default password is
password.
The password is case-sensitive.
4. Click the Sign In button.
5. Select Settings > Router > Basic.
6. In the LAN section, specify your hotspot’s LAN settings.
If the DHCP server is enabled, it automatically assigns an IP address to each device on
the network and manages its configuration information.
The DNS mode setting specifies how the DNS servers are obtained. If you select Auto,
the servers use the DNS relay specified by the Internet provider.
The Submit
button displays after you make a selection.
7. Click the Submit button.
Your changes are saved.