NETGEAR BR200 User Manual

Contents
Chapter 1 Introduction
Overview................................................................................................5
Key hardware features.........................................................................6
Safety instructions and warnings........................................................6
Chapter 2 Hardware Overview
Front panel with LEDs........................................................................11
Back panel...........................................................................................12
RJ-45 ports for 10/100/1000M BASE-T Ethernet connectivity.....12
Reset button........................................................................................13
Chapter 3 Installation
Step 1: Prepare the site......................................................................15
Step 2: Protect against electrostatic discharge..............................16
Step 3: Unpack the router.................................................................16
Step 4: Install the router.....................................................................17
Install the router on a flat surface.................................................17
Install the router in a rack..............................................................18
Wall-mount the router...................................................................18
Wall-mount the router horizontally.........................................19
Wall-mount the router vertically..............................................20
Mount the router to a pole or another surface...........................22
Step 5: Connect the router to a modem.........................................22
Step 6: Connect devices to the router.............................................22
Step 7: Check the installation...........................................................23
Step 8: Apply power and check the LEDs.......................................23
Step 9: Configure and manage the router......................................24
Chapter 4 Troubleshooting
Hardware troubleshooting chart......................................................26
Additional troubleshooting suggestions.........................................27
3

NETGEAR BR200 Specifications

General

DSL WAN	No
Ethernet WAN	Yes
Throughput	0.924 Gbit/s
Number of users	256 user(s)
Networking standards	IEEE 802.1Q
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	5 Gigabit Ethernet
Ethernet LAN (RJ-45) ports	4
Routing protocols	RIP-1, RIP-2
VPN support	SSL Message Integrity: MD5, SHA-1, MAC-MD5/SHA-1, HMAC-MD5/SHA-1 SSL Certificate Support: RSA, Diffie-Hellman, Self L2TP Server PPTP Server
Firewall security	Stateful Packet Inspection (SPI), Port/Service Blocking, Denial-of-service (DoS) Prevention, Stealth Mode, Block TCP Flood, Block UDP Flood, WAN/LAN Ping Response Control
Security algorithms	AES, DES, SSL/TLS
Flash memory	128 MB
Certification	Environment: RoHS Safety: CE/LVD, cUL EMI: FCC Part 15 Class B, CE mark, C-Tick Class B, VCCI
Processor frequency	1.7 MHz
Internal storage capacity	1 GB
Sustainability certificates	RoHS
Product color	White
Output current	1.5 A
Output voltage	12 V
Power source type	AC
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	0 - 90 %

Weight and Dimensions

Depth	187.5 mm
Width	314 mm
Height	43.65 mm
Weight	1550 g