NETGEAR BR200

Key hardware features
The router includes the following key hardware features:
•
Four Gigabit Ethernet LAN ports
•
One dedicated Gigabit Ethernet WAN (Internet) port
•
Media Access Control (MAC) address table size of 16K entries, automatic address
learning function to build the packet-forwarding information table
•
Processor speed of 1700 MHz
•
1 GB of RAM and 128 MB of flash memory
•
Includes the following mounting hardware:
-
Four rubber footpads for tabletop installation
-
Wall-mount screw kit for wall installation
-
Rack-mount brackets and screw kit for rack-mount installation in a standard
19-inch rack
•
AutoSensing and autonegotiating capabilities for all ports
•
Auto Uplink™ technology is supported on all ports
•
Store-and-forward transmission to remove bad packets from the network
•
Active flow control to minimize packet loss and frame drops
•
Half-duplex backpressure control
•
Per-port status LEDs and system status LEDs:
- System Power LED
- System Internet LED
- Cloud Connection LED
- Per-port link, speed, and activity LED
•
VPNC (Basic, AES Interop), ICSA Firewall
Safety instructions and warnings
Use the following safety guidelines to ensure your own personal safety and to help
protect your system from potential damage.
Hardware Installation Guide6Introduction
Insight Managed Business Router BR200