NETGEAR BR500

Factory settings
You can reset the router to the factory default settings that are shown in the following
table.
For more information about resetting the router to its factory settings, see Return the
router to its factory default settings on page 107.
The following table shows the factory default settings.
Table 2. Router factory default settings
Default SettingsFeature
Router login
www.routerlogin.net (or www.routerlogin.com or 192.168.1.1)User login URL
adminUser name (case-sensitive)
passwordLogin password (case-sensitive)
Internet connection
Use default hardware addressWAN MAC address
Determined by the protocol that is used for the Internet connection (see Change
the MTU size on page 41)
WAN MTU size
AutoSensingPort speed
Local network (LAN)
192.168.1.1LAN IP address
255.255.255.0Subnet mask
EnabledDHCP server
192.168.1.2 to 192.168.1.254 for the default LAN subnet (LAN1)DHCP range
192.168.1.2 for the default LAN subnet (LAN1)DHCP starting IP address
192.168.1.254 for the default LAN subnet (LAN1)DHCP ending IP address
VLAN 1 with all LAN ports as untagged members
VLAN 2 with the WAN port as an untagged member
VLANs
DisabledDMZ
North America: Pacific Standard Time
Europe: GMT
Other continents: Varies by region
Time zone
User Manual160Supplemental information
Insight Instant VPN Router BR500