NETGEAR BR500

A login window opens.
3. Enter the router user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. If you didn’t change the password, enter password. The user name
and password are case-sensitive.
The Dashboard displays.
4.
Select ADVANCED > Firewall > Traffic Rules.
The Traffic Rules page displays.
5.
In the table, click the blue pencil icon for the rule.
The Edit Traffic Rule slide-out panel opens.
6.
Change the settings for the rule.
For more information about the settings, see Add a firewall traffic rule on page 65.
7.
Click the Apply button.
The modified rule displays in the table on the Traffic Rules page and the changes
go into effect immediately.
Remove a traffic rule
If you no longer need a traffic rule, you can remove it from the firewall.
To remove a traffic rule from the firewall:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter https://www.routerlogin.net.
Your browser might display a security message, which you can ignore. For more
information, see Log in to the local browser interface on page 16.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. If you didn’t change the password, enter password. The user name
and password are case-sensitive.
The Dashboard displays.
4.
Select ADVANCED > Firewall > Traffic Rules.
The Traffic Rules page displays.
User Manual68Manage the Firewall and
Security
Insight Instant VPN Router BR500