EasyManua.ls Logo

NETGEAR BR500

NETGEAR BR500
162 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
A login window opens.
3. Enter the router user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. If you didn’t change the password, enter password. The user name
and password are case-sensitive.
The Dashboard displays.
4.
Select ADVANCED > IPv6.
The IPv6 page displays.
5.
From the Internet Connection Type menu, select Auto Detect.
The page adjusts. The router automatically detects the information in the following
fields:
Connection Type. This field indicates the connection type that is detected.
Router’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired
for the router’s WAN (or Internet) interface. The number after the slash (/) is the
length of the prefix, which is also indicated by the underline (_) under the IPv6
address. If no address is acquired, the field displays Not Available.
Router’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired
for the router’s LAN interface. The number after the slash (/) is the length of the
prefix, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the field displays Not Available.
6. In the LAN Setup section, select an IP Address Assignment radio button:
Use DHCP Server. This method passes more information to LAN devices but
some IPv6 systems might not support the DHCPv6 client function.
Auto Config. This is the default setting.
This setting specifies how the router assigns IPv6 addresses to the devices on your
home network (the LAN).
7.
(Optional) In the LAN Setup section, select the Use This Interface ID check box and
specify the interface ID to be used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
8. Select an IPv6 Filtering radio button:
Secured. In secured mode, which is the default mode, the router inspects both
TCP and UDP packets.
Open. In open mode, the router inspects UDP packets only.
User Manual29Specify Your Internet Settings
Manually
Insight Instant VPN Router BR500

Table of Contents

Other manuals for NETGEAR BR500

Related product manuals