NETGEAR CM1100 User Manual

Log In to the Cable Modem
To log in to the cable modem:
1. Connect a computer to your cable modem.
You can connect a computer to your cable modem using the following methods:
• Connect a computer to your cable modem using an Ethernet connection.
• Connect a WiFi router to your cable modem using an Ethernet connection, and then connect a
computer to your router using a WiFi or Ethernet connection.
2. Launch a web browser.
3. Enter http://192.168.100.1.
A login window opens.
4. Enter the admin user name and password.
The user name is admin.The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
Change the admin Password
You can change the default password that is used to log in to the cable modem with the admin user name.
Be sure to change the password for the user name admin to a secure password.The
ideal password contains no dictionary words from any language and contains
uppercase and lowercase letters, numbers, and symbols. It can be up to 30 characters.
Note
To set the password for the user name admin:
1. Launch a web browser from a computer that is connected to your cable modem.
2. Enter or http://192.168.100.1.
A login window opens.
3. Enter the admin user name and password.
The user name is admin.The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > Set Password.
The Set Password page displays.
5. Type the old password, and type the new password twice.
6. Click the Apply button.
Manage Your Network
15
Nighthawk Multi-Gig Speed Cable Modem

NETGEAR CM1100 Specifications

General

DOCSIS	3.1
Channel Bonding	32x8
Backward Compatibility	DOCSIS 3.0
Product Type	Cable Modem
IPv6 Support	Yes
Max Download Speed	2 Gbps
Max Upload Speed	1 Gbps
Compatible ISPs	Xfinity, Cox, Spectrum
Ethernet Ports	2 Gigabit Ethernet ports